NEW SPRINT CAR FULL FRONT AXLE KIT W/ BRAKES,BLACK,SPINDLES,HUBS,ARMS,50 X 2 1/2

Description

You are bidding on a
Brand New Southwest Speed Complete Sprint Car Front
Lightweight
Axle Kit
with Wilwood Brakes
, 50" x 2 1/2" Black (#003-1862).
Includes:
Southwest Speed 50" Black Axle (#003-1812):
Gloss Black Powder-Coated 4130 Chromoly
Jig built for quality & exact fit
Axle king pin bosses are factory honed
Axle Diameter: 2 1/2"
Axle Wall Thickness: .095"
Length: 50" center of king pin boss to center of king pin boss
9 Degrees of Left Front Caster
9 Degrees of Left Front King Pin Angle
12 Degrees of Right Front Caster
10 Degrees of Right Front King Pin Angle
Features 1" of Left offset
1/2"-20 Threaded panhard bar stud
1/2"-20 Threaded shock mounts
1/2" Radius rod bolt holes
Approximate Weight of 13.75 lbs.
Fits most popular Sprint Car Chassis, including Maxim, Eagle, Triple X, and, J&J
2 Winters Front Hub Assemblies (#SC3980):
Left side hub has built-on rotor mount
Forged 2024-T3 Aluminum
CNC Machined maintaining precise tolerances
Gold anodized to resist corrosion
Hubs come complete with screw-in dust caps, wheel studs, nuts, bearings, races, and seals
Left Front Caliper Mounting Bracket (#003-2022):
Includes bolts
Wilwood Dynapro Single Brake Caliper (#120-10188):
Features Two 1.75" pistons
Wilwood's Billet DPS Caliper represents the newest generation of calipers available as an upgrade or replacement for applications previously using the long-standing Dynalite Single (DLS) model series. DPS calipers combine superior strength with several new performance enhancements to make these the best "Dyna" series calipers ever built. The DPS is perfect for compact high performance braking as required in Open Wheel applications. The two piston caliper is rigid, lightweight and holds a .50" thick, 1.1 cubic inch brake pad. Internal fluid passage and multiple bleed fittings permit right or left, front or rear mounting options.  High temperature square piston seals control piston retraction while the heavy wall stainless steel deep cup pistons reduce heat transfer from the pad to the brake fluid. Calipers accept 1/8-27 NPT inlet fitting and come standard with our exclusive Quick-E-Clip pad retainer.
Wilwood Polymatrix Q Compound Brake Pads (#15Q-10144K):
Comes with 4 pads, which gives you an extra pair for replacement
Wilwood's Polymatrix Q Compound is great for Sprint Car racing, giving:
Enhanced friction ceramic formula features the lowest noise & dust properties available from a performance compound pad
Improved friction over OE replacement pad compounds - smooth engagement, long service life, increased fade resistance, & quick recovery time
Best compound for specialized application aluminum rotors & compatible with all vented iron rotors
Wilwood Aluminum Brake Rotor (#160-3327):
10.95" Outside Diameter
.310" Thick
Lightweight aluminum construction
Drilled for lower rotating weight
Weighs only approximately 1.8 lbs
Wilwood's 3 hole mount Aluminum rotors are precision CNC machined from high strength billet plate. Full symmetrical machining provides perfect balance, perfect flatness, and the truest rotation of any rotor being built. A durable black anodized finish prevents corrosion and simplifies the visual inspection of the contact faces.
2 Winters Spindle Assemblies (#SC3622):
10 Degree
Forged from 7075-T6 Aluminum
Pins are centerless ground, heat-treated 4340 steel
Bronze bushings are reamed for exact fit
Includes "trick" locknut kit
Polished for excellent look
Bushings are honed to properly fit king pins
Radiused on outer edges
Includes nuts and washers
2 King Pins (#003-1843):
Hollow
Fits Winters #SC3622 and similar 10 degree spindles
2 King Pin Caps (#003-1842)
King Pin Shim & Bearing Kit (#003-1841):
Kit will supply both sides
Contents:
2 Thrust Bearings
4 Thrust Washers
2 Thrust Shims
Left Side Combo Steering Arm (#003-1910):
Forged 7075-T6 Aluminum
Black anodized
Right Side Steering Arm (#003-1922):
Forged 7075-T6 Aluminum
Black anodized
Steering Tie Rod / Drag Link (#003-1005):
4130 Chromoly with welded-in threaded ends
Black Powder-Coated
Includes rod ends, jam nuts, and spacers
5/8" Threads
45 3/4" long
We have this axle available
individually and in other kits with spindles, king pins, hubs, etc.
You can browse hundreds of other Sprint Car, Midget, and Mini-Sprint items in our Ebay store.
We also have thousands of other High Performance Parts in our
store.
Shipping:
There is no faster shipping on Ebay.  If you pay for the item by 5:00 Eastern, Monday-Friday, we will ship it the same day.  If it's after 5:00 EST, we will ship it the next business day.  If you pay for the item on the weekend, we will ship it out Monday.
Ebay now requires that sellers put a "handling time" on each item and "1 Business Day" is the shortest listed option.  WE DON'T HAVE A HANDLING TIME.  We ship same day in accordance with the paragraph above.  No delays here.  We want you to have the parts as bad as you do.
Shipping cost will be .99 within the continental United States.  If you buy 2 or more of our auctions, shipping will certainly be combined to save you money.  We will be glad to ship internationally.  Just send me a message for an international shipping quote.
Accepted payment methods:
We accept Paypal. If buyer doesn’t have a Paypal account, he or she can pay with Visa, Mastercard, or Discover through seller’s merchant account.