DCC Bus Breakout - DCC and Power Breakout for model railroads

Description

DCC Power breakout boards are a small circuit boards I have developed for use in my large yard areas to simplify wiring from the main track power bus to each track section. Since no connectors are required, they are a lot more reliable and much more cost effective.
On my layout I simply cut the DCC bus wires, solder this in the middle and then solder each set of feeder wires to a respective pair on the board. Just add as many in the line as you need!
These can also be used
for any other sort of situation where power needs to be distributed - IE city street lighting and building lighting as well.
In my modular layout i use three per 6' section: One for DCC power, one for 12VDC power (accessories), and one for 5VDC power (lighting)
The bus holes will take up to ~12AWG Solid / ~14AWG Stranded , the feeders up to ~18AWG Solid / ~20AWG Stranded